voltage rating

What if the voltage ratings of both sources are different?

Voltage rating is another area over which the different standards vary.

However, they have relatively low switching current and voltage ratings.

The limit is usually around 20% of the forward blocking voltage rating.

Bear in mind their voltage ratings only go up to a few volts.

This allows for a higher voltage rating or capacitance value using a smaller total volume.

The capacitor shall be charged at the d.c. voltage rating for 60 minutes.

Because of their inherent low voltage rating, there is little need to provide high-voltage insulation for operator safety.

In practice the upper voltage output is limited to the voltage rating of components used.

For portable radios, hearing aids and similar equipment, B batteries were manufactured with various voltage ratings.

Voltage rating of the fuse must be greater than or equal to what would become the open circuit voltage.

Generally the larger the physical size, the larger the capacitance or voltage rating will be when all other ratings are held constant.

Voltage rating: MI cable is only manufactured with ratings up to 1000 volts.

The voltage rating of the capacitors determines the maximum output voltage.

Extra bands on ceramic capacitors will identify the voltage rating class and temperature coefficient characteristics.

Readers will doubtless already be well aware that the voltage ratings quoted for electrolytic capacitors are really quite important.

Voltage ratings can reach 100 kilovolts.

An insulated wire or cable has a voltage rating and a maximum conductor temperature rating.

By choosing the correct powder type and sintering temperature, a specific capacitance/voltage rating can be designed.

The air space required increases with system voltage and with the lightning surge voltage rating.

Voltage ratings vary, but most receivers are operated at 5 V or 6 V.

This removed the need for the semiconductor device used in the current injection circuit to have high breakdown voltage rating and also provided electrical isolation.

Fuses are manufactured in a wide range of current and voltage ratings to protect wiring systems and electrical equipment.

Voltage rating of the fuse.

For all voltage ratings, dead front construction with provisions for high voltage terminators is available.