Weitere Beispiele werden automatisch zu den Stichwörtern zugeordnet - wir garantieren ihre Korrektheit nicht.
No more than a minute later the end of the suction pipe struck something hard.
He heard a whirred puff as the suction pipe operated.
She caused £60 of damage to the pumphouse suction pipe after colliding with it.
The first known use of a true suction pipe (which sucks fluids into a partial vacuum) in a pump.
A two-piece telescopic suction pipe adjusts to fit all types of container.
One or more suction pipes are inserted through the floor slab into the crushed rock or soil underneath.
The circulating air suction pipe should be at the base of the hopper, as near the feed throat as possible.
The dredge drag head is a steel structure that is connected to the dredger by a suction pipe.
A plain suction dredger has no tool at the end of the suction pipe to disturb the material.
The suction pipe was thinning atmosphere that was already too rare to suit Harvey Lanyon.
The dredge drag head is connected to the ship by 2 adjustable suction pipes that are sucking water with sand like a vacuum cleaner.
Attached to the lower suction pipe the dredge turning gland allows a radial rotation in both directions of 15 .
A big suction pipe is then lowered into the purse and the herring are pumped from the net and spewed into the vessel's holds.
I smeared the blood on to a slide which I laid in the suction pipe, introduced it into the vacuum tank and bombarded it with silver ions.
The water in the sphere is being constantly circulated, so he releases the urine from the tube into the sphere's suction pipe, which sends it to the water filter.
The pumps at Station No. 1 are arranged in a neat row, their suction pipes reaching down under the building to connect to the city's vast network of drainage canals.
When the ship has to dredge in waves, the suction pipes are suspended from davits in order to keep the suction nozzles in contact with the sea floor.
A trailing suction hopper dredger (TSHD) trails its suction pipe when working, and loads the dredge spoil into one or more hoppers in the vessel.
The number and location of suction pipes that are needed depends on how easily air can move in the crushed rock or soil under the slab and on the strength of the radon source.
Supported by the gantries and by using hydraulic winches the dredge drag head and suction pipe are let down on the sea bottom in order to suck a mixture of water and sand.
In order to dredge in waves, the suction pipe is suspended from special davits, which operate with heavy compensation to ensure that the drag head nozzles stay in contact with the sea bed.
A radon vent fan connected to the suction pipes draws the radon gas from below the home and releases it into the outdoor air while simultaneously creating a negative pressure or vacuum beneath the slab.
Al-Jazari also invented a twin-cylinder reciprocating piston suction pump, which included the first suction pipes, suction pumping, double-action pumping, and made early uses of valves and a crankshaft-connecting rod mechanism.
Often, when a home with a basement has a sump pump to remove unwanted water, the sump can be capped so that it can continue to drain water and serve as the location for a radon suction pipe.
