slotted screw

Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

It is usually associated with a plain head for slotted screws, but has been used with many head forms.

Changing the blade is done by means of two slotted screws in front of the blade.

He took the revolver from his son and fitted the screwdriver blade into the slotted screw head on the right side of the rear sight.

Originally, NES carts were held together with 5 small, slotted screws.

The tool was much more documented in France, and took on many different shapes and sizes, though every version was still designed for slotted screws.

(Slotted screws are rarely used in mass-produced devices, since the driver is not inherently centered on the fastener.)

It comes with two double-ended bits (two for slotted screws and two for Phillips screws).

These earliest screwdrivers had pear-shaped handles and were made for slotted screws (diversification of the many types of screwdrivers did not emerge until the Gilded Age).

Among slotted screw drivers, there are a couple of major variations at the blade or bit end involving the profile of the blade as viewed face-on (from the side of the tool).

However, on Benchmade's offering the titanium bolsters and micarta scales were replaced with G10 fiberglass scales, the slotted screws were replaced by Torx head screws, and the pocket clip was repositioned so that the knife could be carried in the pocket in a tip-down position.