serial communication

Standard serial communication over telephone lines is sufficient for remote capabilities.

Note that at the physical layer, this is considered as synchronous serial communication.

Morse code was an early form of serial communication, which in modern times is usually automated.

Once connected, the art of serial communications can be made easier by selecting decent software.

In effect, this technique creates a serial communications tunnel through a network connection.

A later update of the port could use either ethernet or serial communications.

An important aspect of serial communications is the concept of flow control.

Bit banging is a technique for serial communications using software instead of dedicated hardware.

European car manufacturers started using different serial communication topologies, which led to compatibility problems.

A socket on a computer that is used for serial communication (one bit at a time) between a computer and another device.

Common means of connecting these devices include Ethernet or serial communication cabling.

For the use of start-stop systems in telecommunication, see asynchronous serial communication.

Other serial communications standards are better adapted to drive hundreds or thousands of metres of cable.

When using serial communication, only one bit is transferred at a time, for example over a communication channel or computer bus.

The IIfx also included two special dedicated processors for sound and serial communications.

A serial communications transceiver can use loopback for testing its functionality.

Such absolute encoders also communicate using serial communication protocols.

The digital time code sends 10 characters at 300 bits per second using 8N2 asynchronous serial communication.

It was also provided with a parallel printer port and a serial communications port.

Many computer networks, as well as many lines where data is transferred over a long distance use serial communication.

The package explains the complexities of serial communications using on screen tutorials with animated sections.

This allowed a serial communication link over a dedicated timeslot of a DS1 carrier.

If the data is destined for serial communication, it is best to use the bit ordering the data will ultimately be sent in.

It is typically used for serial communication and was rated for 19.2 Kbits per second signalling rate.

RSTS uses a serial communication connection to interact with the operator.