rocker arm

Another disadvantage is the contact point between the cams and rocker arms.

His 44th place finish was due to a break in the rocker arm.

Mama taught me well about tires, and many other things besides, but I knew nothing of rocker arms.

Thus, the rocker arm geometry is stated to be over-arcing.

It was like a cam and rocker arm.

A more obvious change concerned the layout of the rocker arms that operated the valves.

"Our paths would never have crossed if it weren't for a bent rocker arm."

This arrangement caused the outer exhaust valves to have a rather long rocker arm.

The valves were operated by short rocker arms from an overhead camshaft.

It is a single-cam, 12-valve design, with manually adjustable rocker arms.

The rocker arms are constructed using metal injection molding.

"He can listen to a car and say, 'You've got a loose rocker arm'."

Titanium is used for the valves and the rocker arms have a diamond-like coating.

A user would place his feet on the pedals and swing the rocker arms back and forth.

Current automotive design favors rocker arm ratios of about 1.5:1 to 1.8:1.

It sounds like a good machine, a perfectly balanced rocker arm, something well-oiled and precise.

"I threw out a rocker arm on my car and I got Turtle.

At slower speeds, the low-speed cam and rocker arm control the valve timing.

The IN2 rocker arms have a white mark.

The two intake valves in each cylinder are operated by a rocker arm with its own cam lobe.

Valves: Two valves arranged in a 90 configuration, operated through rocker arms.

It had a four-bearing crank and shaft-mounted rocker arms, as did the Chevrolet engine.

The man who straightened out my rocker arm was named Bob Two Two.

The muscles were clamped to rocker arms which actuated rotors and drive-wheels.

The system consists of a mechanical lifter mechanism that uses a second rocker arm to push the valve closed.