Weitere Beispiele werden automatisch zu den Stichwörtern zugeordnet - wir garantieren ihre Korrektheit nicht.
These have poor power density, working well only at a steady state.
The lower frequencies at high power densities present a significant risk.
They also have a very high power density in the core, which requires special design features.
In practice, this means either not breeding or operating at a lower power density.
The batteries could have high power density and potential of 4.7 V per cell.
Some facilities have power densities more than 100 times that of a typical office building.
The power density necessary for this effect is however sufficient to also cause permanent damage.
In addition, the confinement time required depends on the power density.
A parts washer can be characterized by its power density.
A doubling of power density may not be out of the question.
This form of local cooling is essential to developing high power density chips.
Supercapacitor power density is generally 10 to 100 times great than batteries.
Doubling power density at least halves the cost of electricity.
What is measured is the power density of the emissions.
Can operate at lower core power density levels using natural circulation without forced flow.
Always use appropriate eye protection measures when working with lasers or other high power density light sources.
In addition, they have a higher power density.
Thus its power density is only 0.46 kilowatts per kilogram.
This makes finding the true power density in this region problematic.
It permits increased power density, and a smaller mirror.
This approach results in better efficiency and cleaner emissions, but sacrifices some of the power density.
To achieve even higher power densities, halogen lamps were used.
Pumps have a power density about ten times greater than an electric motor (by volume).
Such high thrust to power ratio comes at a price of low power density, however.
Action of the beam at low power density or over a very short time results in melting only a thin surface layer.