Weitere Beispiele werden automatisch zu den Stichwörtern zugeordnet - wir garantieren ihre Korrektheit nicht.
Typically pH meters have very large ranges, from 0-13 at least, sometimes larger.
A pH meter can be found at almost any garden shop or nursery.
They are also used in chemical analysis and calibration of pH meters.
Since pH meters seem to have ranges, what causes this limit to the range?
For example, it is usually the internal reference electrode in pH meters.
For very precise work the pH meter should be calibrated before each measurement.
Most desirable would be a simple electronic pH meter.
One could stick a pH meter into the reaction mix, and plot its change versus time.
After being told it was within 0.1 accurate, I found another friend with a different and much more expensive pH meter.
It provides an alternative to the commonly used glass electrode in a pH meter.
Many pH meters now correct for temperature issues.
There are numerous designs for simple pH meters all over the Internet.
Because of this, no definite indicator may be appropriate and a pH meter is often used to monitor the reaction.
Despite its ubiquity, a pH meter using a glass electrode is not the "best" method.
(I'm assuming you do not have access to a pH meter!)
A pH meter is a very simple device that measures a difference in electrical potential using electrodes (such as glass).
Therefore, most wineries will us a pH meter that can give readings to an accuracy of plus or minus 0.1.
During his employment at Baltimore he developed a pH meter based on a tungsten wire.
Before using a pH meter, you calibrate it by dipping the probe into one or more reference solutions.
In the early 1950s he started mass-production of pH meters; the present company was registered in 1953.
His kitchen is a welter of calibrated cylinders, acidity kits and pH meters.
Beckman invented the pH meter in 1935.
Other than a pH meter how might one determine the pH of a bleach solution?
You might just want to get in touch with nearby universities that could loan you a pH meter and some standardizing solutions.
The probe is an essential part of a pH meter, it is a rod like structure usually made up of glass.
