outboard

Now the stealing involves mostly outboard motors and fishing boats.

Many current designs are now using an integrated bottom bracket with outboard bearings.

Pump-jet propulsion is available as an option on most outboard motors.

The company's primary business is outboard motors.

The space under the living quarters housed his racing scull and small, outboard hydroplane.

There were old logs floating in the lake, almost waterlogged, that could turn a Gemini over or break its outboard prop.

It had a constant chord centre section with outboard taper on both leading and trailing edges.

Pinion (outboard wing) fuel tanks and a mildly swept tail were also featured.

Only able to start four outboard motors out of the six, they cruised towards JOHN.

Power was exclusively outboard engine.

It increases the local angle of attack on an inboard wing, while having no influence on an outboard wing.

"We charge ahead, but these IBSS aren't exactly outboard racers."

The blow-thru valves are available with 10-vane open-end rotor; outboard bearings and replaceable shaft seals.

It had a fabric covered parasol wing with a straight leading edge but pronounced outboard taper on the trailing edge.

The outboard wing pylons were never used in peacetime since aerodynamic flutter loads would structurally fatigue the wing.

Some outboard effects units and digital signal processing (DSP) boxes commonly found in a studio are:

Lanchas (fast, open, outboard boats) will take groups of four people out for an hour's turtle-spotting (and, in winter, sometimes dolphin-spotting) for around $300.

A series of thrusts verging towards the trench are formed with the youngest most outboard structures progressively uplifting the older more inboard thrusts.

This left the outboard wing pylons unutilised as the Rb 28 was the only missile integrated there up until the AJS modernisation.

Topics covered in Salt Water Sportsman include fishing techniques, knots, rods and reels, fishing line, lures, rigs, boats and marine and outboard motors.

Outboard wing modifications were aimed at reducing the peak subcritical pressure coefficient and moving it aft in an effort to reduce shock strength and increase shock sweep.

Motor modifications are limited to strict motor specifications and equipment alterations defined and published in APBA category rule books for these outboard hydroplane racing classes.

"In that case," said Heimat, "we'll just hang these kids over the stern to be outboard motors and kick us in-two of them, anyway," he added, patting Oniko's bowed head.

"I Put some fuel in the left inboard drop and left outboard wing tanks during refueling, but there's a serious leak in both those tanks and it's almost goneabout fifteen thousand pounds.

These outboard sections each had two sets of simple vertical interplane struts, carried balanced ailerons on upper and lower planes and a V-bottomed stabilising float mounted clear of the lower wing.