loading rate

Quite often researchers repeat the measurements as a function of the bond loading rate.

Cheek pouch capacities and loading rates of heteromyid rodents.

Chemical alterations include changes in the loading rates of biostimulatory nutrients, oxygen consuming materials, and toxins.

The elastic moduli of typical amorphous polymers increase with loading rate but decrease when the temperature is increased.

The first is midsubstance tearing in which the fibers of the ligament pull apart in the tissue, generally during a fast loading rate.

Depending on the conditions (such as temperature, state of stress, loading rate) most materials can fail in a brittle or ductile manner or both.

Even there are other parameters that estimate the life of a component like working temperature, loading rate (fatigue), residual stress and stress concentration.

These slower speeds with an incline also had significantly reduced loading rates and reduced lower-extremity net muscle moments.

Ammonia nitrogen was removed via nitrification-denitrification up to 40% when nitrogen loading rates were of 0.18 kg N/(m d).

Lower extremity joint loading is estimated through net muscle moments, joint reaction forces, and joint loading rates.

Rubber is generally regarded as a "non-hookean" material because its elasticity is stress dependent and sensitive to temperature and loading rate.

The final mode is tibia or femoral avulsion fractures, usually occurring during relatively slow loading rates [ 1 2 ] .

"Effect of substrate loading rate of chemical wastewater on fermentative biohydrogen production in biofilm configured sequencing batch reactor".

Good biomass retention: higher biomass concentrations inside the reactor can be achieved, and higher substrate loading rates can be treated.

The elevated biomass concentration in the MBR process allows for very effective removal of both soluble and particulate biodegradable materials at higher loading rates.

A marine loading arm is an alternative to direct hose hookups that is particularly useful for larger vessels and transfers at higher loading rates and pressures.

Ductile materials like steel tend to become more brittle at high loading rates, and spalling may occur on the reverse side to the impact if penetration doesn't occur.

"Anaerobic biohydrogen production from dairy wastewater treatment in sequencing batch reactor (AnSBR): Effect of organic loading rate".

Quantitative We use the Kelvin model as a conceptual representation for describing the individual behavior of both the ligament and the bone as a function of loading rate.

Because of the imposed biomass concentration limit, such low loading rates would result in enormous tank sizes or long HRTs in conventional ASP.

The effects of loading rate and the influence of axial loading on transverse and transverse loading on axial stress-strain responses are also discussed."

The resulting graph of the average rupture force as a function of the loading rate is called the force spectrum and forms the basic dataset for the dynamic force spectroscopy.

Warm weather will require large oxygen transfer rates, and waste accumulation during cold weather can cause short-term warm weather oxygen requirements to exceed long-term waste loading rates.

Individually, these properties can be viewed as providing a protective mechanism under many circumstances in that they make the joint stiffer and stronger at high loading rates, at least up to their strength limits.

TPump uses standard Teradata SQL to achieve moderate to high data loading rates to the Teradata RDBMS.