layer thickness

Another notable addition is the expansion from 10 to 12 layers thickness.

These steps are repeated until the desired layer thickness is obtained.

This formula shows that the layer thickness is proportional to the temperature.

This quantification is based on the relationship between the current traveling through the sample and layer thickness.

The bond strength is highly dependent on the oxide layer thickness and character.

With increasing layer thickness the flow resistance of the filter cake increases.

The elements are positioned at the mid-surface of the actual layer thickness.

To achieve a homogeneous layer thickness, the mould's position has to be changed during coating.

The perfect lens effect is only effective for certain conditions, but allows a resolution roughly equal to the layer thickness.

More detailed cakes often require special moulds to maintain the perfect layer thickness.

When history doesn't exist, the sense of place is robbed of density, its layered thickness.

To compensate for the reduction in active layer thickness, a small number of identical quantum wells are often used.

Debye length is characteristic of the Double layer thickness.

Some profilometer systems include a ground penetrating radar, used to record asphalt layer thickness.

Using multilayer coating a layer thickness up to 1 mm is reachable.

Thus, the primary determinant of active layer thickness is the maximum temperature attained during the summer.

As the layer thickness approaches the nanometer scale, however, capacitors lose the ability to store charge.

The maximum increase, however, requires the bars to operate with the optimum condensate layer thickness.

As the electrolyte concentration increases the diffuse double layer thickness decreases.

"Thin" is a relative term, but most deposition techniques control layer thickness within a few tens of nanometres.

He found that for Prandtl number greater than 0.6, the thermal boundary layer thickness was approximately given by:

Also the retinal structural reliability improved greatly after the treatment, characterized by an increase in the outer nuclear layer thickness.

Boundary layer thickness is also useful in knowing when the fluid can be treated as an ideal fluid.

L is the diffusion layer thickness.

The adhesive layer thickness depends on the viscosity, rotational speed and the applied tool pressure.