lateral resistance

Sufficient lift and lateral resistance are provided by the fin.

A centreboard can no longer be used as its enormous lateral resistance would immediately flip the board over.

Shear walls are a type of structural system that provides lateral resistance to a building or structure.

The theoretical centre of lateral resistance is on the trailing edge of the daggerboard.

Modern proa hulls are often symmetrical, and use leeboards for lateral resistance.

In still water, where the wind is pushing the boat sideways, a contrary force (lateral resistance) develops, resisting that movement.

What do you do for lateral resistance?"

The centre of lateral resistance.

The design allows lateral resistance upwind, without the need for skegs, dagger boards or center boards.

Because the daggerboard is located so far forward, the junk must use a balanced rudder to counteract the imbalance of lateral resistance.

The ends of the sleeper are shaped to form a "spade" which increases the lateral resistance of the sleeper.

The new "soft" structure responds in unison with original masonry infill panels to provide sufficient lateral resistance to protect the building's historic fabric from damage.

The center of lateral resistance is the center of pressure of the hydrodynamic forces on the hull of a boat.

Advantages of this system over conventional cross tie sleepers are reduced ballast pressure (up to half), increased lateral resistance, and increased support of track.

A centerboard differs from a ballast keel in that centerboards do not contribute to the stability of the vessel; their purpose is to provide lateral resistance.

While the skeg bestows additional lateral resistance to the hull aft producing directional stability, its robust design also supports and protects the rudder.

Similarly, the sideways resistance of the board, which is largely controlled by the daggerboard, acts through the imaginary centre of lateral resistance (CLR).

A series of cavitation resistant asymmetric foils, with fences to prevent ventilation at height speeds, are situated in the vaka hulls serve to provide lateral resistance.

If the center of pressure is astern of the center of lateral resistance, a weather helm, the tendency of the vessel to want to turn into the wind.

The board moves through the water - much like a sailing boat does - using an extendable centreboard (if available) and fin or skeg for stability and lateral resistance.

With the canting keel handling the ballast functions, lateral resistance and steering can be managed separately with a foil (or pair of foils fore and aft).

It was discovered, through testing at the University of Adelaide, that these walls had significant, load bearing, shear and lateral resistance together with earthquake-resistance, fire-resistance, and thermal properties.

Advantages include increased lateral resistance and lower weight than monobloc concrete sleepers, as well as elimination of damage from torsional forces on the sleeper centre due the more flexible steel connections.

Buckling Restrained Braced Frame (BRBF) is a structural steel frame that provides lateral resistance to buckling, particularly during seismic activity.

Tie-backs are steel tendons drilled into the face of the wall which extend beyond the soil which is applying pressure to the wall, to provide additional lateral resistance to the wall.