kerf

Perhaps they were traveling, east or west of the route Kerf had taken.

Support the work adequately so the kerf does not close in on the blade.

The saw kerf is usually made this way from the base saw metal.

The width of the kerf is equal to the set of the saw.

However, they also have a wider kerf and as such remove more material than a conventional blade.

The smaller kerf on these blades dramatically increased the yield from a given log.

Watching the log's kerf movement while cutting, helps to indicate binds.

A nonuniform feed rate can lead to a kerf of varying thickness.

The kerf of the blade is adjusted with a tool called a saw tooth setter.

Kerf told him he was switched on.

"She shines and smiles," Kerf went on, not listening.

All that travel for nothing, Kerf thought.

One major advantage of wire saws is their smaller kerf, as compared to a blade.

When a fine blade is used, the kerf of a scroll saw is all but invisible.

A variant on the kerf bend can be used to create living hinges in laser cut wood.

The raker follows the cutters, scraping the bottom of the kerf.

Then, using a bandsaw because of its narrow kerf, chop a piece off.

Karl explained that the first kerf they'd make would be on the opposite side of the tree from the direction of its fall.

If the kerf begins closing, which can cause the saw to bind, wedges could be inserted in order to keep it open.

The kerf (saw cut) is of minimal width and, when the prices were re-assembled, the joint was only just visible.

The kerf produced by the blades is somewhat wider than the blade thickness due to the set of the teeth.

When it was dark, they went to the signal room, polished the mirror and lighted the lantern while Kerf worked the shutters.

If the kerf grabs inwards, it will first grab onto the splitter rather than the moving blade.

The minimum radius of a curve that can be cut on a particular saw is determined by the width of the band and its kerf.

The concave back of the saw makes it easier to place wedges, preventing the kerf from closing on the saw.