input wire

The lines on the left of each gate represent input wires or ports.

Each group corresponded to an input wire for the next bank of rotors.

The block pulse input wire leading to battery positive is dipped permanently in the water.

However, when a layer carries at most three input wires for any weight, that layer will be the last one.

(If the digital multiplier serialized its output, however, it would also require only 2 input wires.)

When an insulation breakdown allowed the input wiring to arc, the high temperatures allowed the secondary wires to short to the inputs.

Make holes for the solenoid valve output wire and for the mains input wire.

The result will be an output wire of the same weight and an output wire with a higher weight for each three input wires.

On a breadboard, it is easy to set the clock - just move the input wires to drive higher-frequency signals into the minute-hand section of the clock.

All the input wires were connected directly to the battery charge device since Jarvis had no battery capable of storing the energy required in only a few milliseconds.

By using a half adder for the two weight-16 input wires, the Dadda tree ensures that the last layer has only two output wires for any weight.

Additionally, a digital multiplier would naively require input wires, whereas a stochastic multiplier would only require 2 input wires.

Axeon can supply both off-board and on-board battery chargers, which include an enclosure, the mains input wiring and safety circuits, as well as the umbilical cabling, and can also arrange them to be CE mark approved.

His headphones were attached to a device on his belt that had input wires from the long-handled metal detector that searched endlessly for coins and other valuables that had made their way into the sand on the coast of California.

This algorithm first generates a new pair of public and secret keys for the homomorphic encryption scheme, and then uses these keys with the homomorphic scheme to encrypt the correct input wires, represented as the secret key of the garbled circuit.

When an engineer needs to connect several devices to the same set of input wires (e.g., a computer bus), but retain the ability to send and receive data or commands to each device independently of the others on the bus, he can use a chip select.