heat of evaporation

I can't compare numbers of latent heat of evaporation right now.

However, water has a higher heat of evaporation, and is therefore the only liquid generally used for thrust augmentation today.

When removing the water, more than 99% of the energy needed goes towards supplying the heat of evaporation.

Because water containing heavier isotopes has a higher heat of evaporation, its proportion decreases with colder conditions.

Being easily condensed and possessing a high heat of evaporation, sulfur dioxide is a candidate material for refrigerants.

This evaporation has a cooling effect due to the latent heat of evaporation of water.

The latent heat of evaporation absorbed by the vaporisation of the working fluid reduces the temperature at the hot end of the pipe.

Direct evaporative cooling (open circuit) is used to lower the temperature of air by using latent heat of evaporation, changing liquid water to water vapor.

Evaporative cooling - In winter, dry surface air entering a moisture-saturated cave may have an additional cooling effect due to the latent heat of evaporation.

Steam injectors use the Venturi effect and the latent heat of evaporation to deliver feed water to a steam locomotive boiler.

Leading to one of the biggest problems in industrial evaporation, the process requires enough energy to remove the water from the solution and to supply the heat of evaporation.

The following year, he used his theory to establish relationships between the temperature, pressure and density of gases, and expressions for the latent heat of evaporation of a liquid.

Evaporating suspensions Evaporating suspensions are simply a mixture of some sort or fine powder, talc, or clay mixed into a liquid with a low latent heat of evaporation.

Ammonia refrigerant is cheaper, easily available and has a high latent heat of evaporation but it is also highly toxic and can form an explosive mixture when mixed with oil containing high percentage of carbon.

The air from the qanat was drawn into the tunnel at some distance away and is cooled both by contact with the cool tunnel walls/water and by the giving up latent heat of evaporation as water evaporates into the air stream.

The enthalpy of vaporization, (symbol ), also known as the heat of vaporization or heat of evaporation, is the energy required to transform a given quantity of a substance from a liquid into a gas at a given pressure (often atmospheric pressure).

LATENT HEAT:-It has high latent heats of evaporation and solidification (e.g. 2 times as much heat is required to cause boiling water to change into water vapour as is required to bring cold water to the boil).

Flue gases are cooled to a relatively low temperature within the thermal store, approximately 50 C (122 F), and steam within these gases condenses into liquid releasing the associated latent heat of evaporation, which further increases the efficiency in the manner of a condensing (gas) boiler.

The component of total energy transfer that accompanies the transfer of vapour into the system is customarily called 'latent heat of evaporation', but this is a quirk of historical language usage, not in strict compliance with the thermodynamic definition of transfer of energy as heat.