flue gas
flue gases

Not all available devices in the market have a flue gas treatment plant.

The gases from the combustion are known as flue gas.

The output temperature of the flue gas is also high (450 to 650 C).

The average flue gas flow decreases as less water vapor is present.

However, these are often referred to as flue gases.

Lowering dust losses in flue gases has more than 60 years of practice.

Usually addition of the halogens to the flue gas are used for this purpose.

Legislation in Europe has been efficient to reduce flue gas pollution.

The concentration of pollutants in the flue gas is higher, making separation easier.

Mostly a fan transports the flue gas to the stack.

The temperature of the flue gases leaving the combustion zone.

In addition, it can be used to lower the nitrogen oxide content of the flue gas.

Later the carbon monoxide in the flue gas was burned to provide additional heat.

The size of the flue gas treatment equipment can be reduced by 75%.

Forced draft: when air or flue gases are maintained above atmospheric pressure.

As a by-product, high quality plaster is made when cleaning the flue gas.

The flue gas from combustion of the fossil fuels is discharged to the air.

This recovers the greatest part of the energy of the flue gas.

The heat loss from the flue gases as they flow through the chimney or stack.

The flue gas is cleaned and cooled by the scrubber tower.

Here, carbon dioxide is captured from flue gases at power stations or other large point sources.

The mass and volume of the flue gas are reduced by approximately 75%.

Heat of condensation can be captured and reused rather than lost in the flue gas.

Because of possible problems with corrosion by the flue gases, such constructions are very rare.

But there are devices available with a dry flue gas cleaning system according to the rigorous European standards.