eutectic point

The product must be solidly frozen below its eutectic point.

For an in depth discussion of the physics and chemistry, see eutectic point.

In the ternary diagram, Superloy is situated close to the eutectic point.

The mixing ratio that results in the lowest possible melting point is known as the eutectic point.

The point is called the eutectic point.

For a simple binary phase diagram, if one eutectic point is observed then the substances do not form a cocrystal.

If two eutectic points are observed, then the composition between these two points corresponds to the cocrystal.

This lowest point in a Phase Diagram is known as the Eutectic Point.

This is represented on the Phase Diagram by the area below the curve and to the right of the Eutectic Point.

When the two elements are mixed together, the alloy between Bi an In presents three eutectic points, being:

When the remaining melt reached the eutectic point, the cavities crystallized a mixture of schreibersite and meteoric iron.

There is also a metastable eutectic point at 24.8% between ice and the HCl 3HO crystallization.

Ideally the surface temperature of the product should not rise above the eutectic point of ‑23 °C (e.g. during opening of refrigerators, etc.).

In this case, the freezing is done rapidly, in order to lower the material to below its eutectic point quickly, thus avoiding the formation of ice crystals.

Fixed temperature detectors operate when the heat sensitive eutectic alloy reaches the eutectic point changing state from a solid to a liquid.

Eutectic Point The lowest freeze point that can be achieved for a given solution of water and a freeze point depressant.

They have crystallized from magmas that have compositions at or near a eutectic point (or a temperature minimum on a cotectic curve).

Its alloy is classified as a fusible alloy, which have a melting point lower than the eutectic point of the tin lead alloy.

The remaining liquid was trapped in cavities of the IIABs and crystallized once the temperature reached the eutectic point.

Ethanol-water has an unusually biased eutectic point, i.e. it is close to pure ethanol, which sets the maximum proof obtainable by fractional freezing.

In eutectic mixtures the solidus and liquidus temperatures are identical, i.e., the mixture melts completely at one temperature, the eutectic point.

Measurement of Rh-C, Pt-C and Ru-C eutectic points by four national metrology institutes.

These textures document simultaneous crystallization of quartz and feldspar from a silicate melt at the eutectic point, perhaps in the presence of a water-rich phase.

Lodranites can be described as chondrites that were heated to the point where FeNi and FeS reach an eutectic point.

As we can see from the diagram provided, a 29.8% calcium chloride solution will not freeze until the temperature reaches -51o C - this is its Eutectic Point.