diametral

Teeth in which the working depth is less than 2.000 divided by the normal diametral pitch.

Value of diametral pitch in a normal plane of a helical gear or worm.

Its value is based on the number of teeth, the normal module (or normal diametral pitch), and the helix angle.

As a rule of thumb the average backlash is defined as 0.04 divided by the diametral pitch; the minimum being 0.03 and the maximum 0.05.

A predefined diametral position on the gear where the circular tooth thickness, pressure angle and helix angles are defined.

Module is a direct dimension, whereas diametral pitch is an inverse dimension (like "threads per inch").

The crosshead design reduces sideways forces on the piston, keeping diametral cylinder liner wear in the order of only about 0.03 mm per 1000 hours.

Moreover, any previously inserted circumcenters inside the diametral ball of the original segment (before it is split) are removed from the triangulation.

A change of center distance is accomplished by changes in operating values for pitch diameter, circular pitch, diametral pitch, pressure angle, and tooth thicknesses or backlash.

The circumcenter of a poor-quality triangle is inserted into the triangulation, unless this circumcenter lies in the diametral circle of some segment.

A.G.Pathan (1993): "An Evaluation of Fracture Toughness of Rock Using Diametral Compression Disks".

Inlaid in its surface, in grooves, are two coils essentially like two figure 8s, but shaped more like a letter D and its mirror image, forming a circle with a diametral crossover.

Drogowa Trasa Średnicowa (DTŚ, can be translated as diametral highway or central highway) is a highway in Silesian Voivodeship, Poland.

This is distinct from the diametral index of cooperation or international index of cooperation, which is the product of the drum diameter and the number of lines per unit length for a rotating device.

Radial dimensions use an "R" followed by the value for the radius; Diametral dimensions use a circle with forward-leaning diagonal line through it, called the diameter symbol, followed by the value for the diameter.

There is a dorsal spine with an arrangement of ribs below the shoulder plates, as you can see, but the lowermost rib-immediately above the body cavity-has developed into a massive hoop of bone with a diametral strut stretching forward from an enlarged spinal vertebra.