dark slide

When used, the dark slide is removed for the period of the exposure and then replaced.

On sliding it back in, the same channels for holding the dark slide are used to cover the film.

In place, the dark slide is in a film holder or magazine.

"Yes, sir," he said, in a husky voice, and then began the long dark slide into sleep.

So," here he shut the dark slide of his lantern, "now to the outside."

Something small and sleek and dark slid around the gatepost.

The half dark slide is flipped over, and the other half of the film is available for a second shot.

To make an exposure, she would first pull out the dark slide to allow the film to be exposed when the shutter was tripped.

The camera lacks an internal dark slide, so one has to be inserted into the film holder before changing the lens.

The cassette had a built-in dark slide to prevent stray light reaching the film when the disc was removed.

There are two dark slides and two regular slides.

Tongue twisting over the wet flesh in his mouth, Dark slid high to the tip, sucking hard before gliding again to the base.

The exposure is made, the dark slide is replaced, and the film holder is removed from the camera.

Making his way through a pair of dark sliding doors, he negotiated a long, high-ceilinged corridor with a gray stone floor and textured white walls.

For insertion of the wooden dark slide plate cassette, the hinged focusing screen is swung up and away.

A manually inserted blade known as a dark slide allows the film to be covered when changing lenses or film backs.

When focus and composition were satisfactory, the ground glass screen was removed and a sensitised plate put in its place protected by a dark slide.

In use, a pair of plates joined back to back were used with both plates covered with a dark slide.

The camera has a built-in dark slide that allows the electronic leaf shutter lenses to be changed with film in the camera.

After each exposure, she would insert the dark slide, turn the advance lever by a small increment and then remove the camera back holding the film.

Next, the holder is inserted into a large-format camera, and the dark slide is removed from the holder.

The term "dark slide" refers to the fact the slide is pulled or slid out of the frame either plastic or wooden.

Using a dark slide which has been cut in half, turning a standard format into a long, skinny panoramic format is simple and very cost effective.

Load the plate holder into the camera, withdraw the dark slide and expose the plate (can range from less than a second to several minutes)

Splash Hill - Eight slides, including two racing slides and two dark slides.