cutter bar

One part is a rigid assembly of the cutter bar and engine.

It has a commercial-grade cutter bar for added durability and strength.

Rotate the reel backward by hand so the blades pass across the cutter bar at least a dozen times.

This system is used whether the field is cut by scythe, cutter bar, or rotary mower.

When the cutter bar is much shorter than the hemp is tall, overlapping occurs.

She turned to the cluster of students gathered around the wooden table in the food service area of Cutters Bar.

The helmet attempts to protect the user's head against impact with the cutter bar of the chainsaw should a kickback occur.

Use a medium file and whetstone to hone the edge on the cutter bar, then bolt it and the remaining parts in place.

We're meeting at Cutters Bar and Grill, at seven."

Cutter Bar, Case, Model 57.

A cutter bar runs beneath sleeper level excavating all of the ballast under the sleepers to a specified, variable depth.

Hussey's reaper used a sawlike cutter bar that cut stalks far more effectively than McCormick's.

The Cutter Bar A fictional pub, where the members of the Water Police liked to relax after a hard day at work (introduced in season two).

One advantage of a well honed reel mower is that the blades make clean, scissor-like cuts at the point they shear off grass against the mower's fixed cutter bar.

You can repaint the wheel side plates, shrub bar and handle shaft, but do not paint the gears, bearings, shaft ends, or cutter bar and reel assembly.

The rotating reel above the cutter bar holds the grain against the sickle bar knives and pushes the cut grain onto the bed of the reaper after it is cut.

Do not attempt to sharpen the cutting blades on the reel assembly with a file; instead apply fine-grit grinding compound (available at auto-supply stores for valve grinding) to the cutter bar.

A variation of the platform, a "flex" platform, is similar but has a cutter bar that can flex over contours and ridges to cut soybeans that have pods close to the ground.

The standard header, sometimes called a grain platform, is equipped with a reciprocating knife cutter bar, and features a revolving reel with metal or plastic teeth to cause the cut crop to fall into the auger once it is cut.

The large rotating reel above the cutter bar pushes the grain into the sickle bar and then pushes the cut grain onto the combine's first conveyor belt that delivered the grain to the threshing part of the combine.

Tim reckons that his American Case combine, with its seven-metre (nearly 24ft) cutter bar can harvest eight acres an hour, depending on the density of the crop, at 30 tons an hour - which can mean 60 acres on a good, dry day.

The design was such that it worked along the coal seam (along a "longwall panel") The machine's cutter bars, the "jibs" as they were called, (two in the original model and three in a later versions) were designed to both shear and undercut the coal seam.