Weitere Beispiele werden automatisch zu den Stichwörtern zugeordnet - wir garantieren ihre Korrektheit nicht.
The rods are threaded into the coupling nut for a certain distance.
Do not over-tighten the coupling nut from the regulator stem.
With the mounting and coupling nuts removed, you can pull the faucet off the sink.
The coupling nut is usually equipped with flats or knurling for easy assembly.
A sight hole is provided in the coupling nut to verify adequate thread engagement.
A flare fitting consists only of the fitting and a coupling nut.
Unscrew the coupling nut first, then the mounting nut.
To install a compression fitting, slide the coupling nut onto the tubing, followed by the ferrule.
A hollow coupling nut slides over this and screws onto the end of the tailpiece sticking down from the faucet.
To join the pipe, slip the coupling nut over the new pipe, then the gripping ring and sealing cone.
It features two bayonet lugs on the female connector; mating is fully achieved with a quarter turn of the coupling nut.
Coupling nuts can be used to tighten a rod assembly inward or to press a rod assembly outward.
Another nut, the coupling nut, connects the tailpiece to the riser pipe that comes from the shutoff valve.
Coupling nut dimensions are described by the Industrial Fasteners Institute in standard IFI-128.
Coupling nuts threaded with two different thread sizes and profiles are called reducing coupling nuts.
Hose and electrical coupling nuts shall be wired in the same manner at tube coupling nuts.
Flexible pipe is joined with threaded couplings consisting of a plastic fitting, coupling nut and sealing cone and a metal gripping ring.
These are available at hardware and plumbing supply stores and consist of a plastic fitting, a coupling nut, a sealing cone and a metal gripping ring.
A coupling nut also known as extension nut is a threaded fastener for joining two male threads, most commonly a threaded rod, but also pipes.
Slide the compression ring down as far as it will go (against the valve) and tighten down on the coupling nut that fits over this compression ring.
Place the end of the tubing against the end of the fitting's threaded sleeve, then thread the coupling nut onto the sleeve and tighten it with a wrench.
After cutting, slip the large coupling nut that is part of all fittings over the new pipe, followed by the metal gripping ring and plastic sealing cone, which are also standard.
With the addition of a plastic coupling nut it is possible to mate SMB plugs with every SMB receptacle that meets the current industry standards.
Most specifically their precision, tapered teeth that lock out all movement between the two frame sections when the coupling nuts draw the lugs together and are tightened with a spanner wrench.
An extension nut may be used to achieve the higher string height at the peghead end of the fingerboard.
A coupling nut also known as extension nut is a threaded fastener for joining two male threads, most commonly a threaded rod, but also pipes.
