cooling water circuit

Marine biofouling in power station cooling water circuits.

The cooling water circuit incorporates a filter and a flow switch in order to protect the dynamometer from damage.

Sometimes, parts of the cooling tower internals detach themselves and are carried into the cooling water circuit.

Such matter enters into the cooling water circuit through the cooling water pumps from sources like the open sea, rivers or lakes.

Animals and plants are killed by impingement on the filter screens and during passage through the cooling water circuits (entrainment).

In addition, factories have cooling water circuits which generally include cooling towers or cooling ponds and recycle.

This often means doubling up on items like risers, electrical supplies, desk cabling, cooling water circuits, chillers and pumps.

Steam is passed through a vacuum ejector of high efficiency to exhaust a separate, closed vessel which forms part of a cooling water circuit.

The enclosure internal air is cooled by integration into an existing cooling water circuit or by connection to the Rittal large cooling unit.

Cooling water circuits are also expensive, require numerous equipment, such as pumps and cooling towers, and expensive water treatment.

The most fundamental and usually preferred method of controlling fouling is to prevent the ingress of the fouling species into the cooling water circuit.

The dedicated tenant cooling water circuit provides a method of heat rejection which avoids the need for the main air conditioning chillers, pumps and fans to work outside normal hours, or during weekends.

Researchers at the Institute had observed that some vapour condensers operated more efficiently than others, requiring less cooling water flow and subsequently less electrical power for the cooling water circuit.

After the observation of gas bubble jets released from one of the deformations of primary cooling water circuits in August 2008, the HFR reactor was stopped for a thorough safety investigation.

Biofouling is the buildup of biological slimes together with some concentration and deposition of salts and debris on surfaces so reducing the overall efficiency of the cooling tower and cooling water circuit.

LOCATA hand bearing compass £10 2 Hot water heaters with 12v fan. These heaters can be put in the engine cooling water circuit to provide hot air in the cabin.

Cooling water circuits in power plants consume a high amount of fresh water and chemicals, and their alternative, electric air cooled steam condenser consumes part of the power produced in conventional power plants, reducing the Rankine cycle efficiciency.