compression test

The "hot compression test" is probably the most accepted of these tests.

This compression test will be done at the well head on selected wells.

It is then pulled from the water and immediately subjected to a compression test.

Other interested parties were on the way - no time for a compression test or trip to the mechanic.

Compression tests on small samples for which conventional testing methods cannot be used.

Also the mechanic performed a compression test after the engine started to get harder to start.

Additionally, the cylinder pressure developed when an engine is running will be higher than that shown in a compression test for several reasons.

The results of the constant rate of compression test can be:

Five parameters involved in the model have been determined from mechanical and poromechanical compression tests.

A universal testing machine is sometimes configured to perform a package compression test.

The permeability and the coefficient of consolidation were also determined during the compression tests.

One-dimensional compression test data from eight sands were examined.

Testwell, according to people briefed on the case, falsified compression tests.

This note examines the effect of unloading duration on unconfined compression test results.

What happened to the awesomeness in the compression test and bend test that we once witnessed?

However, the values of ′ in extension tests were 6–7° higher than those in compression tests.

Effect of maturation on heart rate response to ocular compression test during rapid eye movement sleep in human infants.

The magnitude of the cohesion was nearly the same as the cohesion observed in compression tests.

Axial tension and compression tests were performed on open-ended pipe piles.

In either of these events, use a small oilcan and squirt a little oil into each cylinder, then repeat the compression test.

Some plane strain compression tests, under similar conditions, were carried out to obtain accurate stress-strain data.

In a compression test, there is a linear region where the material follows Hooke's Law.

The team also performed compression tests using a micromanipulator to determine just how much force a mosquito could withstand and still be able to fly.

Sometimes, testing of cohesive samples is done with no confining pressure, in an unconfined compression test.

It was found that both field vane and laboratory compression tests tended to underestimate the strength required for stability.