Weitere Beispiele werden automatisch zu den Stichwörtern zugeordnet - wir garantieren ihre Korrektheit nicht.
So now I am trying to fix it by adding a compensator and a cathode follower."
It works something like a cathode follower; so the circuit requirements aren't too weird for us to follow.
To offset high resistance in glass micropipettes, a cathode follower must be used as the first-stage amplifier.
Active probes were used before the advent of high-frequency solid-state electronics, using a small vacuum tube as cathode follower amplifier.
The internal design is essentially identical to the vintage Marshall, with the exception of using a plate-fed tone stack instead of the Marshall-trademarked cathode follower.
Stone Pony - 25 or 50 Watt (2x7591), tube rectified, EF86-12AX7 cathode follower.
To solve this problem, a cathode follower amplifier must be used as an impedance matching device to collect the voltage and feed it to a conventional amplifier.
Schmitt also coined the term biomimetics and invented the Schmitt trigger, the cathode follower, the differential amplifier, and the chopper-stabilized amplifier.
These designs take care of grid currents through the use of cathode followers or interstage transformers easing current load on the driver stages, and deep negative feedback to minimize distortion.
SoHo - 20 watt (2 x EL84) or 35 watt (4 x 7591), Tube rectified, EF86-12AX7 cathode follower.
The first requirement is typically solved with a long-tailed cascode stage (2 or 3 double triodes), the second - with two cathode followers inserted between the driver stage and the power stage.
A recirculation chassis, containing cathode follower, pulse former and retimer, modulator, which drives the transmitting crystal, and input, clear, and memory-switch gates, mounted in the sections adjacent to the mercury tanks.
Monterey - 22 watt (2 x 6V6), Monterey HP: 38 Watt (4 x 6V6), EF86-12AX7 cathode follower; formerly known as the Memphis.
The VTVM had a fixed input impedance of typically 1 megohm or more, usually through use of a cathode follower input circuit, and thus did not significantly load the circuit being tested.