valve stem

Push the valve stem through the hole, again from the inside.

This is mainly due to the design of the valve stem, among other reasons.

Turning the handle raises the valve stem inside the faucet.

Wrap more packing around the valve stem, then tighten the nut down over it.

Rochefort grunted and pointed toward the valve stem of the first jack.

Could this perhaps be inlet valve stem oil seals?

Each ram is moved in or out by turning its valve stem, which extends beyond the coupling.

They are attached to the valve stem ends, seating within spring retainers.

The internal beadlock is inflated via its own valve stem.

The regular valve stem is used to inflate the tire to the desired pressure.

The weakest point of a bicycle rim is usually the hole for the valve stem.

She heard the hissing of air rushing out the valve stem as she got to her car.

However, the resulting forces required of the stem would be too great and cause the valve stem to fail.

Buy additional material, wrap three or four turns of it around the valve stem, and reinstall the nut.

Loosening the nuts may also loosen the valve stem.

A valve stem is mounted to the gate valve disc.

These requirements can be met by systems with external pressure sensors that connect to the valve stem on each tire.

Early in the 100-mile race, he touched wheels with another car and broke the valve stem of a tire on his car.

A water-based sealant can be injected into the tire either through the valve stem.

It comprises an outer valve stem and an inner valve body.

As well, lash caps are often used to attain a required valve stem protrusion.

Friction may be reduced at the point of contact with the valve stem by a roller cam follower.

If tightening is ineffective, or if turning the valve stem becomes too difficult, replace the packing.

Get a new valve stem.